show access-list counter

show access-list counter {countername} {any | ports port_list | vlan vlan_name} {ingress | egress}

Description

Displays the specified access list counters.

Syntax Description


`countername`	Specifies the ACL counter to display.
`port_list`	Specifies to display the counters on these ports.
`vlan_name`	Specifies to display the counters on the VLAN.
ingress	Specifies to display ingress counters.
egress	Specifies to display egress counters.

Default

The default direction is ingress.

Usage Guidelines

Use this command to display the ACL counters.

Example

The following example displays all the counters for all ACLs:

# sh access-list counter 
Policy Name       Vlan Name        Port   Direction  
    Counter Name                   Packet Count         Byte Count           
==================================================================
temp              *                15     ingress   
    mac1                           0                                         
    mac2                           2720                                      
egressdeny        *                15     egress    
    mac01count                     0                                         
temp              *                20     egress    
    mac1                           0                                         
    mac2                           0

History

This command was first available in ExtremeXOS 10.1.

The egress option was first available in ExtremeXOS 11.3.

Platform Availability

This command is available on all Universal switches supported in this document.